Menu
Cart 0
JL AUDIO VX1000/5i Class D 4 x 75 + 1 x 600 Watts RMS

JL AUDIO VX1000/5i Class D 4 x 75 + 1 x 600 Watts RMS

  • $1,999.00

or make 4 interest-free payments of $499.75 AUD fortnightly with Afterpay More info




5-Channel Class D System Amplifier with Integrated DSP, 100 W x 4 @ 2 Ω + 600 W x 1 @ 2 Ω – 14.4V

Designed to simplify great audio, every VXi amplifier combines our advanced NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor.

Employing our second generation NexD2™ amplifier technology, the VX1000/5i efficiently powers a complete audio system. It can drive four main speakers with 75 W x 4 @ 4 ohms while also powering a subwoofer with up to 600W @ 2 ohms. Bridging the main channels converts it into a very powerful, 3-channel system amplifier with up to 200W x 2 @ 4 ohms on the main channels and 600W @ 2 ohms on the subwoofer channel.

The NexD2™ full-range technology in the main channels of this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The subwoofer channel features an optimized low-frequency variant of the NexD2™ technology. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces.

Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN™ Software application installed.

Amplifier includes: Power Connector (for 2 AWG wire), Analog Input/Pre-Out Harness, Speaker Output Harness, Subwoofer Output Connector, 6 ft A/B USB Cable

 

Rated Continuous (RMS) Power @ 14.4 V


Main Channels @ 4 Ω 75 W RMS x 4
Main Channels @ 2 Ω 100 W RMS x 4
Main Channels – Bridged @ 4Ω 200 W RMS x 2


Subwoofer Channel @ 4 Ω 400 W RMS x 1
Subwoofer Channel @ 2 Ω 600 W RMS x 1


General Specifications:

Frequency Response (Main Channels) 12 Hz – 24 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power (Analog Inputs – Main Channels) 99 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
Frequency Response (Subwoofer Channel) 12 Hz – 1 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power (Analog Inputs – Subwoofer Channel) 99 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W (Analog Inputs – Main Channels) 80 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W (Analog Inputs – Subwoofer Channel) 72 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
S/N Ratio, referred to highest rated power (Digital Inputs – Main Channels) 100 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
S/N Ratio, referred to highest rated power (Digital Inputs – Subwoofer Channel) 99 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W (Digital Inputs – Main Channels) 81 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W (Digital Inputs – Subwoofer Channel) 73 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
Damping Factor @ 2 Ω >50 / 50 Hz
Damping Factor @ 4 Ω >150 / 50 Hz
THD+N @ Rated Power (Main Channels) <1% @ 2 Ω per Ch.
THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs 200 mV – 16 V RMS
Min.Copper Power / Ground Wire Gauge 4 AWG wire
Fuse Rating 80 A (AFS, AGU or MaxiFuse™)
Physical Specifications
Table_Image
Height (H) 2.12 in / 54 mm
Width (W) 11.32 in / 287 mm
Depth (D) 6.62 in / 168 mm
Net Weight 6.45 lb / 2.93 kg

 


We Also Recommend