MOBRIDGE B&O A2B PLUG-N-PLAY KIT - FORD RANGER/RAPTOR/WILDTRAK
MOBRIDGE 8.1.1 CHANNEL DSP AMPLIFIER – B&O A2B PLUG-N-PLAY KIT FORD RANGER/RAPTOR/WILDTRAK
The mObridge Ford Ranger and Raptor/Wildtrak amplifier kit provides seamless integration with your Ford’s SYNC 4 infotainment system to enhance your vehicle’s listening experience. This is a Ranger specific kit for our 9 Channel K2 A2B amplifier. This amplifier replaces the factory B&O amp.
This is a full plug and play kit – everything needed to complete the install of the amplifier in your Ranger/Raptor/Wildtrak is included in the kit and no wires need to be cut! The kit plugs right into the factory connections where the B&O amplifier was connected and uses the factory center channel and door speakers. We also include new tweeter wiring harnesses that simply plug into the factory A pillar tweeters and these can then be controlled via the DSP. The amp comes with a basic tune with crossover points and time alignment set, but this is fully adjustable to suit any aftermarket speakers via our tuning tool mObridge DSP.
Powered by a Blackfin DSP, the mObridge A2B amplifier provides 8.1.1 channels of advanced DSP and amplification, allowing for an unprecedented level of audio quality in your Bronco.
Harness the power of the DSP by using the USB connection to connect it to the mObridge DSP user interface for online firmware updates, full configuration and customization of the audio processing including channel mapping, parametric EQ, crossovers, channel filters, time-alignment, master/channel gain control, and many other features.
8.1 Channel Amplification with Additional Subwoofer Pre-out
The mObridge A2B amplifier features 8x full-range outputs, a dedicated subwoofer channel, and an additional subwoofer pre-out – perfect for all other aftermarket amplifiers.
- 6x 150W Channels @ 4 ohms | 75W RMS
- 2x 300W Channels @ 4 ohms | 150W RMS
- 1x 500W Subwoofer Channel @ 4 ohms (or 800W @ 2 Ohms) | 250w RMS & 400w RMS
- 1x 4V RCA pre-out
- <0.003%THD
- 105db SNR
The subwoofer pre-out provides a 4V RMS output to give you the flexibility to add a secondary powered subwoofer to enhance your audio experience further.
mObridge DSP User Interface
The mObridge A2B amplifier utilizes the mObridge DSP desktop application for Windows/macOS to harness the full potential of the DSP. The application is also able to provide automatic online firmware updates.
- Windows/macOS: mObridge DSP application
We Also Recommend